Volume entitled: "Chemistry Lecture Notes"
Letter from Henry Maudslay to Mr Matthew Murray, Engineer
Volume of extracts on the mines of Minas Geraes
Marshall's Geological Diagrams
Notebooks of notes from lectures in Paris 1802-1803
[Letter] London [to] Mr Goodrich, Portsea or at Mr Peake's Dockyard, Portsmouth/ Sam[ue]l Rehe. [He has received, for Goodrich, the Society of Arts' premium of £65]
Copy [bill] London [to] Navy Commissrs./John Rennie, [for] Cast Iron Diving Bell, [pumps and machinery parts etc Reference to the 'Sheerness Diving Bell'. Bears note re the bell/Goodrich, and note from the Navy Office on verso]
Long pinions in the position for stepping. Adding wheels and short pinions behind long wheels.
Carriage and racks in sections. Sheet 10.
Sections of framing and racks. Sheet 6.
Small planing machine. Sheet 1.
Plan of left half of middle group for General Plan 28.
Untitled plan and elevation. Incomplete.
Temporary staging
"Notes taken during a course of chemical lectures given at Paris in the Winter of 1802-3 by Monsieur Vauquelin"
Notes written in French from two lectures
Drawing of cast iron pump with wrought iron hoop for wells
Drawing of forcing pump proposed to be fixed in the salt water well in His Majesty's Dockyard at Portsmouth
Design for the steam engine for metal mills, longitudinal section of foundry
Drawing depicting elevation of the engine and longitudinary section of the engine house for an atmospherical steam engine
Plan for the engine house and boiler for an atmospherical steam engine
Design for slipping wheel and joint to prevent breaking of machinery
Design for an atmospherical engine steam cylinder with air pump, condenser and winding machinery
Elevation and plan of a crane capable of lifting from five to six tons
Plan for an atmospherical engine steam cylinder with air pump, condenser and winding machinery
The rolling-beam of Plan no.1 with a design for providing it with motion
Ground plan and elevation of a building for the machinery used for making block and pullies at Dunsterville Manufactory
Elevations, section and plan of a moveable steam engine
Design for rebuilding of Albion Mills fire proof, transverse section
Sketch of a pair of small shears for cutting the edges of copper sheets used for the sheating of ships
Drawing of part of swing circular saw
Design for rebuilding of Albion Mills fire proof
Drawing of aqueduct over the River Rea
Drawing of a musket pike
Design for the steam engine for metal mills, cross section of foundry
Plans of storehouses and wharfs at New Gun Wharf, Portsmouth
Ground plan of building of Kings Mills at Portsmouth
Design for the steam engine for metal mills, plan of beam engine
Drawing of lathe for turning pins
Copy plan of part of Plymouth Dockyard showing pump houses, drains and dock
Drawing of engine house, section of boiler seating and stokehole
Drawing of boilers of 56 Horse engine
Drawings of boiler for 56 Horse steam engine at the Metal Mills, Portsmouth
Copy sketch of Mr Heppenstall's spinning frame for rope yarn
Plan of iron mill and copper mill showing hammers, boilers and furnaces in the four buildings
Drawing of engine house, cross section
Arrangement for 56 Horse engine and boiler house, plan
Arrangement for 56 Horse engine and boiler house, elevation of foundations
